Duplex Coating Rock Bolt
Duplex coating rock bolt is applied to conditions which are influenced by underground water and sea water.
Description
Introduction:
Duplex coating rock bolt adopts two corrosion-prevention measurements on the bolt surface. That are hot-dip galvanizing and epoxy coating, which can prevent corrosion very well.
Features:
Duplex Coating Anchor Bar Duplex Coating Rock Bolt
Duplex coating rock bolt is applied to conditions which are influenced by underground water such as road, railway tunnel and subsea tunnel and which are corroded by seawater such as harbor, wharf and buildings on the sea affected.
Features:
1. Thick hot-dip galvanizing coating, dense combination, high anti-corrosion and good toughness.
2. Benefits of epoxy coating:
1) High adhesive force to the steel substrate.
2) Excellent physical properties and chemical stability.
3) Excellent toughness and wear resistance.
4) A wide range of temperature adaptability.
5) Fine insulation and resisting anode dissolution.
3. Its anti-corrosion of the combination of two methods can keep more than 100 years.
Duplex Coating Anchor Bar Duplex Coating Rock Bolt
| Duplex Coating Anchor Bar | |||||||
| Category | Type | Ultimate Tensile Strength Mpa | Yield Strength Mpa | Hot-dip Galvanized Zinc Coating Thickness μm | Epoxy Layer Thickness μm | Thread Strandard | Executive Standard |
| Hot Rolled Ribbed Rebar | D25 | 630 | 500 | ≥70 | ≥60 | GB/T1499.2-2007 | 1. Hot dipped galvanizing meets ISO1461 2. Epoxy coating: bending properties meet ISO 1519, impact properties meet ASTMD2794, adhesion meet ISO 2409:2007 |
| Hollow Bar | R25N | 730 | 550 | ≥70 | ≥60 | "ISO10208" | |
| Hollow Bar | R32N | 700 | 580 | ≥70 | ≥60 | "ISO10208" |